|本期目录/Table of Contents|

[1]徐加祥,杨立峰,丁云宏,等.支撑剂变形及嵌入程度对裂缝导流能力的影响[J].断块油气田,2019,26(06):816-820.[doi:10.6056/dkyqt201906028]
 XU Jiaxiang,YANG Lifeng,DING Yunhong,et al.Effect of deformation and embedment of proppants on fracture conductivity[J].Fault-Block Oil and Gas Field,2019,26(06):816-820.[doi:10.6056/dkyqt201906028]
点击复制

支撑剂变形及嵌入程度对裂缝导流能力的影响(PDF)
分享到:

《断块油气田》[ISSN:1005-8907/CN:41-1219/TE]

卷:
26
期数:
2019年06
页码:
816-820
栏目:
钻采工艺
出版日期:
2019-11-25

文章信息/Info

Title:
Effect of deformation and embedment of proppants on fracture conductivity
作者:
徐加祥123杨立峰23丁云宏1刘哲23高睿23王臻23
1.中国石油勘探开发研究院,北京 100083;2.中国石油勘探开发研究院压裂酸化技术服务中心,河北 廊坊 065007;3.中国石油天然气集团公司油气藏改造重点实验室,河北 廊坊 065007
Author(s):
XU Jiaxiang123 YANG Lifeng23 DING Yunhong1 LIU Zhe23 GAO Rui23 WANG Zhen23
1.Research Institute of Petroleum Exploration & Development, PetroChina, Beijing 100083, China; 2.Fracturing and Acidification Service Center of Research Institution, Research Institute of Petroleum Exploration & Development, PetroChina, Langfang 065007, China; 3.CNPC Key Laboratory for Reformation of Oil and Gas Reservoirs, Langfang 065007, China
关键词:
支撑剂变形嵌入程度裂缝渗透率裂缝导流能力
Keywords:
proppant deformation proppant embedment fracture permeability fracture conductivity
分类号:
TE357.1+2
DOI:
10.6056/dkyqt201906028
文献标志码:
A
摘要:
为了从理论分析的角度研究支撑剂变形及其嵌入程度对裂缝导流能力的影响,在考虑支撑剂之间及其与壁面接触变形的基础上,结合Carman-Kozeny公式,建立了闭合压力作用下支撑剂堆叠层数、支撑剂粒径以及岩石力学参数对支撑剂嵌入程度、裂缝渗透率及导流能力影响的数学模型,并通过实验数据验证其准确性。模拟结果表明:支撑剂堆叠层数和岩石力学参数是影响孔隙变化的主控因素,且堆叠层数越多,弹性模量越小,裂缝孔隙度越小,支撑剂变形导致的孔隙度减小是其总减小量的22%;相较于提高裂缝渗透率,增加裂缝宽度是提高裂缝导流能力的主要途径。
Abstract:
In order to theoretically investigate the effect of deformation and embedment of proppants on the fracture conductivity, based on the analysis of the deformation of proppants and formation rock with linear elastic mechanics, a mathematical model was established in combination with Carman-Kozeny formula to study the influence of proppant packing layers, proppant size and rock mechanical properties on the proppant embedment, fracture permeability and conductivity under different closure pressures. The accuracy of this model was verified by experimental data. The results show that the proppant packing layers and rock mechanical properties are the main controlling factors that affect the fracture porosity. The more the proppants layers are and the smaller the elastic modulus is, the smaller the fracture porosity is. The decrease of the fracture porosity caused by proppant deformation accounts for 22% of the total variation. Compared with increasing the fracture permeability, increasing the fracture width is the main way to improve the fracture conductivity.

参考文献/References:

相似文献/References:

备注/Memo

备注/Memo:
更新日期/Last Update: 2019-11-24